Product Quick Selection Wheel

CAMTEC - 1008W Industrial Supply HPV10001 SERIES

Features
  • 1008 Watts Industrial Power Supply
  • Mains supply with high output voltage
  • TS35mm DIN-Rail
  • C/V curve down to 0V. No fold back
  • Power Good Relay AC & DC-ok optional
  • Efficiency up to 93%
  • Soft start & auto-recovery
  • Precise dynamic response to load change
  • Designed for long life under full stress
  • Strong input filters
  • High reliability. Shock & vibration proof
  • EMC meets CE norm class B
  • Overload and short circuit protection

HPV10001 SERIES

Product Overview

CAMTEC - HPV10001 SERIES 

1008W Industrial Power Supply TS35mm DIN-Rail mains supply with high output voltage  

Available Outputs:   72V,  110V,  150V,  220Vdc  

Description   The Camtec HPV series is a high precision switch mode power supply for an upscale demand. It is engineered and manufactured by CAMTEC in Germany. The designed meets challenging applications like complex dcdrives, piezo print head, test-stands, and professional machine-building. The power supply provides a low ripple-noise, a precise load-regulation and high efficiency up to 93%. High-end long life capacitors guarantee an extended hold-up-time and an extraordinary lifetime of the power supply. The circuit design starts complex loads easily. The internal control circuit manages illegal operating conditions to prevent your system from damages. The HPV series features active high input transients with suppressor diodes, X2-capacitors and varistors. All inputs, outputs and feature connections are galvanic isolated. The design rules set value on extended interference immunity and safety. The unit is designed in accordance to the EN60950-1 and the EMCcompatibility to EN55022 class B norms. Our engineering design is made in accordance to the CSA/UL60950- 1 and the IEEE CB scheme rules.

DC-ok Power Good Relay   The PG Relay connection indicates over temperature, low DC-voltage at the output and low AC supply voltage at the input.

Galvanic Isolation   The power supply is galvanic isolated between the input and the output. All features like the Power Good Relay are connected to the DC power outputs

Thermal shutdown   The HPV is featured with a thermal overload shut down and auto recovery behaviour.

Short Circuit Protection   A continuous short circuit does not cause damage to the power supply. The HPV delivers constant current and 0 output voltage. It recovers automatically after the short circuit is released.

Open Circuit Protection   The HPV series is continuously open circuit protected. The device delivers a stable output voltage and no current. If a load is immediately connected to the device, the power supply stabilizes within 1ms. It does not overshoot the output voltage

Power Up Ramp   The devices has a soft start ramp when powering up. The device does not either overshoot the voltage nor does the output flutter – independent if a load is connected or not.

Current Voltage Chart, CV & CC mode   The HPV series provides a perfect current voltage chart. It has no fold back or other abnormalities. The output voltage can drop down to zero volts when the power supply is overloaded. The unit delivers a stable and constant current to the outputs.

Specifications

GENERAL
Output Voltage See selection table
AC Input Voltage

85..132Vac / 184..265Vac

(115/230Vac input selector, factory setting is 230Vac)

Frequency 47 – 63Hz
DC Input Range

250Vdc – 375Vdc

(input selector set to 230Vac)

AC Input Rating 115Vac<16.8A 230Vac<9A (recommended CB type C16A (230Vac) or C20A (115Vac) or larger)
DC Input Rating 250Vdc<5A 375Vdc<3.3A (input selector set to 230Vac rated)
OR Failure Relay (option) Yes, break contact, protective forced isolation to the inputs and the output 3000Vac
Derating +60°C...+70°C 2.5%/°C
Accuracy < ± 1.5% interface
Load Regulation < ± 0.05% 0-100%
Response to Load Change <1ms 10-100%, 100-10%
Base Load None required (open circuit proof)
Efficiency 230Vac Up to 93% at 90% load
Short Circuit Protection Continuous
Open Circuit Proof Continuous
Temperature Control Yes, thermal shutdown with auto recovery (+70°C, metering distance 10mm)
Hold Up Time >30ms 230Vac
Inrush Current NTC <84A 25°C cold start
Soft Start 100ms typical
STANDARDS AND APPROVALS
EMI EN55022 class B
EMS EN61000-6-2,3
Safety EN60950-1, EN60204-1
Safety class 1(A) VDE0805, VDE0100
RELIABILITY
Isolation paths

> 8mm creepage distance

& clearance paths

Input to Output Isolation 3000Vac
Input to Case Isolation 2500Vac
Output to Case 2100Vdc
MTBF 400000h (IEC61709)
MTTF 127196h (IEC61709)
ROHS conformity ROHS directive 2011/65/EU
REACH conformity REACH directive 1907/2006
ENVIRONMENTAL
Cooling Controlled fan from manufacturer EBM Papst (Germany)
Ambient Operating Temp. - 25°C…+70°C
Ambient Storage Temp. - 40°C…+85°C
Environment

Humidity 95% non-condensing @ 25°C,

climate class. 3k3,

pollution rate II

MECHANICAL
Dimensions (HxWxD) 156x200x114,5 mm
Weight 3200g
AC Terminals Input Screw Terminal 3x AWG20 – AWG6 / 0,5 – 16mm² (L,N,PE)
DC Terminals Output Screw Terminal 4x AWG20 – AWG6 / 0,5 – 16mm² (+ + / - - )

Selection Table

MODEL HPV10001.072 HPV10001.110 HPV10001.150 HPV10001.220
Rated DC Voltage 72Vdc 110Vdc 150Vdc 220Vdc
DC Voltage Range 58 – 86Vdc 86 – 132Vdc 132 – 180Vdc 180 – 240Vdc
Rated DC Current 13,9A 9,1A 6,7A 4,55A
Power Boost 14,6A 9,6A 7A 4,8A
Overvoltage Protection 100Vdc 154Vdc 210Vdc 310Vdc

Ripple Peak

230Vac 20MHz

200mV 250mV 250mV 300mV

Notes:

Coating Option add 'C' to model number, eg HPV10001.110TPGC

We offer the HPV series with an optional coating. It is to be used in e.g. dusty, dirty, high humidity area or in awaiting quick temperature changes. Short circuit and corrosion at print board lines and at solder points can be prevented. The coat itself is a transparent acrylic resin. Peters SL 1306 N-FLZ (transparent) IEC60216-1 2001, IPC-CC-830B, UL listed as permanent coating FileNo.: E80315 , UL94V-0

Technical Illustration

Back to Top

Ask Your Question