CAMTEC - HSD04801 SERIES
480W DIN-Rail Power Supply 3-Phase
Available Outputs:
12V, 15V, 24V, 36V, 48Vdc
Description
The Camtec HSD models are precision DIN-rail power supplies „Made in Germany“.
These power supplies are designed for high reliable power systems.
For more than 20 years the Camtec Power Supplies manufactures high-end switch mode
power supplies in Germany. A field breakdown of below 4 sigma over a 10 years period
under review approves our ambitious quality concept. Each manufactured Camtec product
passes several 100% random tests for each detailed function and a full-load Burn-In test.
Although it is not required from the safety norms our production applies a routine safety test
to each manufactured device, even if it is an extra low-voltage model. The components in
the assembled device pass stress aging to achieve an even level and to prevent from
delayed failures. Our internal product engineering guidelines provide a clear target: Camtec
product reputation must say „mount and forget“. Quality is never a mere promise for our
team.
The HSD DIN-rail power supplies provide low noise and ripple, 2 and 3-phase operation,
and an absolutely precise setting at high load changes. With an efficiency up to 92% the
devices are highly energy efficient.
Equipped with high-end capacitors of outstanding lifetime our power supplies guarantee a
very long and reliable operation time. The circuit design of the HSD series allows cope
playing with complex loads. The internal protection circuits protect the power supply and the
connected system, even in exceptional situations. The HSD series is protected from high
transients by strong filters with high energy efficiency. All inputs and outputs and the
interface are electrically isolated. The design specifications call for the highest standards of
safety and interference suppression. The device was developed in accordance with the
requirements of IEC/CSA/UL60950-1 and the EMC standards EN55022 Class B.
The natural air cooling system allows maintenance free operation.
Specifications
| GENERAL |
|---|
| Output Voltage |
See selection table |
|---|
| AC Input Voltage
| 3xAC 340-575Vac 2xAC 340-575Vac
|
|---|
| AC Input Nominal
| 3xAC 400-500Vac (1.5-1.1A) 2xAC 400-500Vac (1.5-1.1A)
|
|---|
| Input Frequency
| 47-63Hz
|
|---|
| DC Input Range
| 450-820Vdc (1,6-0.9A)
|
|---|
| Failure Relay Power OK
| <48Vdc/500mA (galv. Insulated <60Vdc)
|
|---|
Continuous Power 3x AC Pnom
| 3xAC 400-500Vac = 480Wmax, -20°C…+60°C
|
|---|
Continuous Power 2x AC Pnom
| 2xAC 400-500Vac = 360Wmax, -20°C…+60°C
|
|---|
| Cooling
| Natural cooling
|
|---|
| Efficiency
| Up to 92% 400Vac at full load
|
|---|
| Short Circuit Resistance
| yes
|
|---|
| Open Circuit Protected
| yes
|
|---|
| Base Load (OCP)
| Non required (open circuit protected)
|
|---|
| Load Regulation
| < ± 0,5% 10-100% / 100-10%
|
|---|
| Load Regulation Time
| <1ms on load switch 10-100%
|
|---|
| Temperature Control
| yes, thermal shutdown & autorecovery (+70°C, outside measuring point distance 10mm)
|
|---|
| Hold Up Time
| >15ms 230Vac mains buffering at full load
|
|---|
| Inrush Current
| < 3.5Aeff <5A peak (400-500Vac) active electronic inrush protection (no simple NTC)
|
|---|
| Recommended MCB
| ≥1,5A Char-B 10kA
|
|---|
| Softstart
| typ. 5ms
|
|---|
| RELIABILITY |
|---|
| Isolation Input to Output
| 3000Vac
|
|---|
| Isolation Input to Case
| 2500Vac
|
|---|
| Isolation Output to Case
| 500Vdc , ≥60Vdc= 2400Vdc
|
|---|
| Isolation Failure Relay
| <48Vdc/500mA (galv. isolated <60Vdc)
|
|---|
| MTBF (IEC61709)
| 600000h
|
|---|
| MTTF (IEC61709)
| 152012h
|
|---|
| ROHS
| 2011/65/EU conform
|
|---|
| REACH
| EG No. 1907/2006 conform
|
|---|
| STANDARDS AND APPROVALS |
|---|
| EMI
| EN55022 conducted class B, radiated class A
|
|---|
| EMS
| EN61000-6-2,3
|
|---|
| Safety
| EN60950-1, EN60204-1
|
|---|
| Safety Class I
| VDE0805, VDE0100
|
|---|
| ENVIRONMENTAL |
|---|
| Ambient Temperature
| - 20°C…+70°C operating, derating 2,5%/°C >60°C
|
|---|
| Storage Temperature
| - 40°C…+85°C
|
|---|
| Ambient Conditions
| Humidity 95% non-condensing @ 25°C, climate class 3K3, pollution degree 2
|
|---|
Maximum Operation Altitude
| 3000m above sea level
|
|---|
| MECHANICAL |
|---|
| Dimensions (HxWxD)
| 130x150x118.5mm
|
|---|
| Weight
| 1900g
|
|---|
| AC Terminals
| Input Screw Terminal 3x AWG20 – AWG6 / 0,5 – 16mm² (L1,L2,L3,N)
|
|---|
| DC Terminals
| Output Screw Terminal 4x AWG20 – AWG6 / 0,5 – 16mm² (+ + / - - )
|
|---|
Selection Table
| MODEL | HSD04801.24T | HSD04801.36T | HSD04801.48T
| HSD04801.60T |
|---|
| Rated DC Voltage
| 24Vdc
| 36Vdc
|
48Vdc
|
60Vdc
|
|---|
| Vout Set Range
| 22,5 - 28,5Vdc
| 32,8 - 38,0Vdc
|
45,6 - 52,8Vdc
|
57,0 - 66,0Vdc
|
|---|
| DC Cout -20°C…+60°C
| 20.0A
| 13.3A
|
10.0A
|
8.0A
|
|---|
| DC Cout -20°C…+40°C
| 22.0A
| 14.6A
|
11.0A
|
8.8A
|
|---|
| DC Cout Boost -20°C…+60°C
| 24.0A
| 16.0A
|
12.0A
|
9.6A
|
|---|
| Over Voltage OVP
| 32Vdc
| 50Vdc
|
56Vdc
|
84Vdc
|
|---|
| Ripple Noise 400-500Vac 20MHz
| 50mVpp
| 80mVpp
|
100mVpp
|
120mVpp
|
|---|
Technical Illustration
Back to Top
