Product Quick Selection Wheel


  • 100W - 480W DIN Rail Mountable
  • IEC AC Input connector
  • Corrosion resistant aluminum chassis
  • Optional Condensation drip hood cover
  • Conformal coating coating on PCB assembly
  • Protected against common dust and chemical pollutants
  • Operating Temperature -25°C to 80°C
  • High Efficiency > 90%
  • 150% Power Boost
  • MTBF > 500 000hrs

PBB1P - AC/DC DIN Rail with IEC AC input

Product Overview



AC/DC DIN Rail with IEC Input & Hood

The DRP Series, 100W to 480W single phase: Delta DIN Rail power supplies are provided with optional IEC input connector and condensation drip hood cover.

For outdoor installation sites such as pole mounted CCTV and security monitoring equipment, the PBB1P power supply adaptions facilitate installation into sometimes moist locations and building sites.  The IEC input allows non technical staff to connect and disconnect the power supply.

The DRP Series Delta DIN Rail mount power supplies provide an adjustable output capable of operating from input voltages at 85-264Vac, and a wide temperature range of -20°C to 80°C. With a compact, rugged aluminium case that meets shock and vibration requirements (in accordance to IEC60068-2-27 and IEC60068-2-6 respectively), and conformal-coated PCB assembly, this state of the art design is well suited to a broad variety of industrial applications worldwide.


Input Voltage Range 85-264Vac (DC input range 120-375Vdc)
Input Frequency 47-63Hz
Input Current < 1.10A @ 230Vac
Efficiency > 90.0% @ 230Vac @ 100% load
Leakage Current < 1mA @ 240Vac
Output Voltage 12Vdc, 24Vdc, 48Vdc
Output Voltage Range 11-14Vdc, 24-28Vdc, 48V-56Vdc
Output Current See Selection Table
Indicator Green LED (DC OK)
Line Regulation < 0.5% typ. at 0 - 100% load
Load Regulation < 1% typ. at  0-100% load
PARD (20MHz) < 200mVpp
Hold-up Time > 20ms

16V, 32V, 64V +/-10% SELV Output,

Hiccup Mode, Non-Latching (Auto-Recovery)

Overload/Overcurrent > 150% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)
Over Temperature  < 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto Recovery)
Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery) when the fault is removed)
Degree of Protection IP20
Protection against shock Class 1 with PE (Primary Earth) connection
Galvanic Isolation

Input to Output: 4.0KVAC

Input to Ground: 1.5KVAC

Output to Ground: 1.5KVAC

MTBF > 500,000 hrs as per Telcordia SR-332 I/P: 115Vac, O/P: 100% load, Ta 25 °C
Expected Life Time

10 years (230Vac 50% load @ 40°C )

Operating Temperature -25°C to +80°C
Storage Temperature -25°C to +85°C
Power De-rating > 50°C (2.5% / °C)
Cooling System Convection
Operating Humidity < 95% RH (Non-Condensing)
Operating Altitude 0 to 2,500m
Case Cover Aluminium


of DRP unit

100W: 121 x 50 x 118.7mm, 0.64kg

120W: 121 x 32 x 123.1mm, 0.72kg

240W: 121 x 85 x 124.1mm, 1.1kg

480W: 121 x 144 x 118.6mm, 1.37kg

See Technical Illustration

Mounting Rail Standard TS35 DIN Rail in accordance with EN60715
Input Connector

IEC AC Power Socket

(with 2 meter IEC power cable supplied)

Output Connector

12V: M4 x 2 Pins

(Rated 300V/20A)

 24V, 48V: Pluggable Connector 4 Pins

(Rated 300V/15A)

Output Wire: AWG20-12

Mounting L Bracket

Optional Mounting bracket available

See technical illustrations

Drip Hood Cover

Optional Drip hood cover

Mounted on top of PBB1P power supply to protect against condensation drips

C-Tick AS/NZS CISPR11 Group 1 Class A.
Electronic Equipment EN50718 / IEC62103, In Power Installations
Electrical Safety SIQ to EN60950-1, UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1
Industrial Control UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)
CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
Materials & Parts RoHS Directive 2011/65/EU Compliant

Selection Table








PBB1P-100W-IEC-12V 12V 8A DRP012V100W1AA    
PBB1P-120W-IEC-24V 24V 5A DRP024V120W1BN    
PBB1P-240W-IEC-24V 24V 10A DRP024V240W1BN    
PBB1P-480W-IEC-24V 24V 20A DRP024V480W1BN    
PBB1P-120W-IEC-48V 48V 2.5A DRP048V120W1BN    
PBB1P-240W-IEC-48V 48V 5A DRP048V240W1BN    
PBB1P-480W-IEC-48V 48V 10A DRP048V480W1BN    

Technical Illustration

  • DRP with IEC AC Input opionm DRP with IEC AC Input opionm
  • Optional Mounting Bracket Optional Mounting Bracket
Back to Top

Ask Your Question