Product Quick Selection Wheel

PSC04 Series Battery Chargers - 1U ULTRA COMPACT

Features
  • 1000W - 4000W
  • Configurable Battery Charging System
  • 1U 19" Rack Mounting
  • Network Monitoring
  • N+1 Operation
  • System Monitoring
  • Load & Battery MCBs
  • Battery LVD
  • Customized shelf configurations available
  • Fully Featured Telecom Grade Rectifier
Specification Sheet Make a Sales Enquiry

Battery Chargers - 1U ULTRA COMPACT

Product Overview

 

DC Power System ideal for Telecoms and Data Networks

Enatel’s PSC04 Series Ultra Compact DC Power Systems range in power outputs from 1.0kW to 4.0kW and have a maximum output current of 83A. They are the ideal solution to meet the requirements of telecommunications applications such as access nodes and micro/pico base stations.

Utilising Enatel’s intelligent controllers and modular rectifiers our standalone 1U and 2U Ultra Compact DC Power Systems have been designed to be easily installed into any standard 19” rack and can be customized and configured to meet the individual requirements of each customer.

Specifications

INPUT
AC input 240V AC (90-300V) Single phase
Frequency range 45-66 Hz
Power factor >0.99 full load
OUTPUT
Nominal voltage 24Vdc, 48Vdc, 60Vdc
Output power 4kW @ 48Vdc
2kW @ 24Vdc
Polarity Positive earth, (negative earth option available)
DC DISTRIBUTION
Load Standard Shelf configuration. (Customized configuration available)*
Battery Standard Shelf configuration (Customized configuration available)*
Breaker fail
detection		 Electronic fail detection on both load and battery
breakers
DC Terminals

Rear connected tunnel terminals

PSC04 V1, load and battery 10mm²

PSC04 V2 load and battery 6mm²

Low voltage
disconnect		 See Shelf configuration
System
ENVIRONMENTAL
Ambient Temperature

-20ºC to +70ºC

(maximum output power is derated above +50ºC)
Storage Temperature -30ºC to +85ºC
Humidity 5-95% RH (non-condensing)
Altitude <2,500m at full power
STANDARDS
Safety

EN60950

Electrostatic Discharge CISPR24
Radiated Radio Frequency CISPR22
AC Harmonics EN61000-3-2
AC Flicker and Fluctuations EN61000-3-3
Other CE & RoHS compliant
MONITORING & CONTROL
Display Multi-lingual alpha numeric backlit display 
Communications

Serial: 1x USB port on front panel for local PC interface

TCP/IP: Ethernet interface for communication using SNMP protocol and internal web based configurator*

Modbus: Supported via TCP/IP*
LED Indicators

Green: Power on/monitor OK

Yellow: Non urgent alarm

Red: Urgent alarm
Audible 90dBA buzzer mappable to user defined conditions
Controls 3x push buttons for parameter setting or viewing on front panel
Signal Inputs

Serial bus for rectifier control and interface to peripheral modules

6x digital inputs

2x temperature sensors (one fitted by default)
Alarms 6x alarm relays, 5x of which can be mapped for customised alarm settings
Alarm Contacts 0.3A 100V volts free changeover contacts
Logging Capacity

Periodic log, 16,384 records (dependant on number of parameters logged)

Event log, 16,384 records (dependant on number of parameters logged)
Connections Relay outputs, mini combicon to accept 1.5mm² wire USB port, USB mini B
Breaker Fail Detection Electronic fail detection
*TCP/IP and modbus options only available with SM36 supervisory module.
CONFIGURATION and OPTIONS

Rectifiers

RM2048XE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output

RM2048HE: 2.0kW modular rectifier, 230V AC input, 48V DC output, 41.7A maximum output

RM2048/24: 2.0kW modular rectifier, 230V AC input, 48 or 24V DC output, 41.7A maximum output

RM1860/48: 1.8kW modular rectifier, 230V AC input, 60 or 48V DC output, 30.0A maximum output

Supervisory Modules

SM35: standard monitor featuring full temperature compensation, automated and manual battery testing/equalisation

SM36: enhanced monitor featuring full temperature compensation, automated and manual battery testing/equalisation with TCP/IP

ARBP-1M

Metal rectifier blanking panel

ASM-ABM24(-24-48-60)

 Battery condition monitor for 24, 48 or 60V battery strings
 ASM-AC3P AC mains monitor
MECHANICAL
Input AC Termination

PSC04 V1: 1 phase, LNE 10mm², tunnel terminals

PSC04 V2: 1 phase, LNE 6mm², tunnel terminals
Output DC Termination

PSC04 V1: 10mm², rear connect tunnel terminals

PSC04 V2: 6mm², rear connect tunnel terminals
Dimensions 482.6mm (standard 19" module), 44.45mm (1U), 350mm, W,H,D
Weight 5kg (excluding rectifier modules)

Shipping Dimensions

 540.0mm, 95.0mm, 400.0mm, W,H,D

Shipping Weight

 6.0kg (excluding rectifier modules)

Selection Table

PART NUMBER

MODULAR

RECTIFIERS

MAX SHELF POWER

SUPERVISORY

MODULE

STANDARD DC DISTRIBUTION
PSC04 V1    2

24, 48 or 60VDC

4.0kW

Positive or negative earth

SM36

1 x load circuit breaker (6-63A)

1 x battery circuit breaker (max 63A)

80A Magnetically latching battery LVD
PSC04 V2    2

24, 48 or 60VDC

4.0kW

Positive or negative earth

SM36

3 x load circuit breaker (2-30A)

2 x battery circuit breaker (max 30A)

80A Magnetically latching battery LVD

*System part numbers are dependent on configuration options.

For final system part numbers consult our sales staff for configuration advice.

Technical Illustration

Back to Top

Products

Customer Service


Product Partners

POWERBOX PACIFIC

Follow Powerbox Pacific

on Linkedin

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au
© 2024 Powerbox. All rights reserved.
Close

Ask Your Question