Product Quick Selection Wheel

EMILY 3000 EMILY 3000

Features
  • Nominal power 125W
  • Off-grid power
  • Military Vehicle
  • Battery charger
  • Will also charge Li-Ion and Li-Polymer
  • Use in field
  • Certified military use

EMILY 3000

Product Overview

EMILY 3000 Fuel Cell Generator

Military off-grid, back-up and on-board power

EMILY 3000 is SFC’s most powerful fuel cell generator. In comparison to EMILY 2200, nominal power output has increased about 35 %. With the new Generation EMILY, even Li-Ion and Li-Polymer batteries can be charged. As in before, EMILY is the ideal on-board power supply for military command and multipurpose vehicles. Additionally, EMILY 3000 can be connected to the SFC Power Manager 3G in order to charge batteries in the field. EMILY 3000 has been certified for military use. often do not have access to the mains grid, limiting the possibility to install equipment in remote areas without high logistics effort. Also in command vehicles, reliable off-grid power can be very crucial. A lot of equipment – stationary and mobile – has to run reliably, around the clock and in any kind of weather, also during grid breakdown and service shutdown. 

 

Specifications

TECHNICAL DATA
Roll-axis: permanent 20°

3000 Wh/d

Nominal power

125 W (BoL + 10 %/ EoW – 10 %)*

Nominal voltage

12 V / 24 V / 16 V/ 9.5 V – 11.5 V

Nominal charging current

10.4 A / 5.2 A / 7.8 A / 8 A (limited)

Recommended type

of batteries

Lead-acid battery/ Li- Ion 3.4 and

7 cell/ 3 cell Li-Polymer

Weight

12.5 kg

Dimensions L x W x H

476 x 206 x 285.5 mm

Methanol consumption

<0.9L/kWh

Display

Alphanumeric LCD and Pushbutton (Remote control optional)

Data-Interface

MIL-C-5015 / VG 95234-20-11 SV (RS-232)

MIL-C-5015 / VG 95234-20-8 PN (Power)

ENVIRONMENTAL
Operating temperature

-20 °C to +50 °C

MIL-STD 810F, table 501.4-I, cyclic operation

Start-up temperature +1 °C to +50 °C
Storing temperature -31 °C to +71 °C
Recommended altitude

up to 3000m @100% nominal power

up to 4000m @80% nominal power

Humidity 0 to 100%
Water protection

MIL-STD 810F Method 506.4, Procedure I

Operation under heavy rainfall

Dust

MIL-STD 810F Method 510.4

Procedure I and Procedure II

Vibration

MIL-STD 810F Method 514.5

Table 514.5C-VII, Figure 514.5C-3

AECTP 400 B401 light tracked vehicles

Drop

MIL-STD 810F Method 5146.5,

Procedure IV

Surface Temperature

MIL-STD 1472F Table XXI

Noise emission

MIL-STD 1474D Table 2-II

> 30 m non detectable

Inclination Roll- /

Lateral-axis

Lateral-axis: permanent 35°

temporary 45°

Roll-axis: permanent 20°

Selection Table

FUEL CARTRIDGES

M10

M28

 

  
Item number 150 905 008 150 905 040      
Volume 10L 28L      
Weight 8.4kg 22kg      
Nominal Capacity 11.1kwh 31.1kwh      
Operating temperature -25°C to +50°C -25°C to +50°C      
Dimensions LxWxH 230 x 93 x 318mm

370 x 285 x 403mm

     
Back to Top

Ask Your Question