Product Quick Selection Wheel

PBB2S SERIES PBB2S - Battery Charger System

Features
  • 12VDC 3.5A and 7A power supplies for battery backup
  • High reliability and high efficiency
  • Industrial-grade switching power converter
  • Light weight corrosion resistant aluminum enclosure
  • Output over current and short circuit protection
  • Separate current-limited battery charging output
  • Output over voltage protection
  • Self-resetting battery fuse
  • Over temperature protection
  • Mains OK / DC OK - Green LED and alarm contact
  • Green Battery OK - Green LED and alarm contact
  • Battery Fuse Fail - Red LED
Specification Sheet Make a Sales Enquiry

PBB2S - Battery Charger System

Product Overview

PBB2S Series Battery Chargers / DC UPS

The PBB2S Series is a family of 13.8Vd, 3.5A and 7A off-line battery chargers / DC uninterruptable power supplies which operate from 100-240Vac mains power. When connected to a valve regulated lead-acid (VRLA) battery, these units provide uninterrupted power to a DC load in the event of mains failure.

The PBB2S Series contains a two-step current limited float charger, output overcurrent and short circuit protection, a self-resetting battery fuse, overtemperature protection, and mains DC OK battery OK and battery fuse fail alarms

THe PBB2S is available in a light weight corrosion resistant aluminium chassis mount enclosure.  Both models employ natural convection cooling.  The PBB2S series is for indoor use only.

Specifications

INPUT
Input Voltage

100-240Vac
Nominal Frequency

50–60Hz
Input Current

PBB2S-13-3.5: 1.3A

PBB2S-13-7: 2.8A
Power Factor Conforms to EN61000-3-2
OUTPUT
Output Voltage 13.8Vdc
Output Power 48W, 96W
Output Current

Sum of load + battery charging current.

See Selection Table
Ripple & Noise < 100mVpp, BW=20MHz
PROTECTION
Short Circuit Protection Hiccup, non-latching
Load+Battery Charging Hiccup overcurrent protection, >120% of rated current
Battery Charging Current limited taper charging
Overvoltage 16V +10%/-5% Hiccup
Over Temperature protection Automatic self-resetting
ENVIRONMENTAL
Operating Temperature -10°C to +70°C
Power De-rating

-2.5%/°C above 40°C
Cooling

Natural Convection
Overtemperature Protection Automatic self-resetting
DISPLAYS AND ALARMS

Mains / DC Ok

Green LED. ON=OK

Voltage-free changeover contact

30Vdc, 7A rating

Battery Ok

Green LED. ON=Vbatt > 11.5Vdc

OFF = Vbatt < 10.5Vdc

Voltage-free changeover contact

30Vdc, 7A rating

Battery Fuse Fail

Red LED: ON=FAIL
OUTPUT BATTERY OPERATION

Voltage Drop

Battery to Output

PBBS-13-3.5: 0.47Vdc typ.

PBBS-13-7: 0.55Vdc typ.
Short Circuit Protection

Self-resetting battery fuse

Battery Reverse

Polarity Protection

Indefinite
MECHANICAL
Input Connector

AC Mains 10A Class 1

IEC60320 power inlet

Load and Battery

Connector

4 way pluggable screw terminal block.

Suitable for up to 2.5mm² wire
Alarms Connector

3 way pluggable screw terminal block

Suitable for up to 1.5mm² wire
Dimensions 219 x 114 x 62mm, LxWxD
Unit Weight

PBB2S-13-3.5: 600g

PBB2S-13-7: 900g

View WMBB-C-S Security Cabinet

Selection Table

MODEL NUMBER

OUTPUT

VOLTAGE

TOTAL

CURRENT

BATTERY

CURRENT

OUTPUT POWER
PBB2S-13-3.5 13.8V 3.5A 0.25A 48W
PBB2S-13-7 13.8V 7A 1.0A 96W

Notes:

1)  Total output current is sum of load and battery charging current.

Technical Illustration

Back to Top

Products

Customer Service


Product Partners

POWERBOX PACIFIC

Follow Powerbox Pacific

on Linkedin

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au
© 2024 Powerbox. All rights reserved.
Close

Ask Your Question