Product Quick Selection Wheel

PBMPLS SERIES PBMPLS - DC/AC Sinewave Inverter

Features
  • 500W - 7000W
  • True Sinewave Output
  • Massive Overload Capability
  • High Efficiency Toroidal Transformer
  • CCT Breaker/ Batt Isolator Switch
  • Chassis and Wall mounting

PBMPLS - DC/AC Sinewave Inverter

Specifications

INPUT
Input Voltage

12V, 24V, 48V (Standard)

36V, 72V, 96V, 120V (Also available)

Voltage range -20% to +45% of nominal..
OUTPUT
Output Voltage

230Vac ±4% (Standard)

110Vac ±4% (Option)

Output Frequency 50/60Hz ±0.1
Output Waveform True sinewave < 4% THD.
Power factor correction All conditions.
Crest factor >4
Load start sensitivity 0-20W
Efficiency 94%Typically
PROTECTION
DC to AC isolation 3500V
Over-load protection Yes.
Short circuit protection Yes.

Battery under and over

voltage protection

Yes.
Circuit breaker On/Off

The circuit breaker by pushing switch "UP" the battery supply is connected to the inverter. The circuit breaker will turn OFF automatically if too large a load is left on the inverter continuously. Reset the switch after allowing approx 5mins to cool. If the inverter shuts down due to overload, undervolts or overvolts it can be reset by turning the circuit breaker OFF, waiting 10 seconds (or until LED goes out). Then turning it on again.

Over-temperature protection Yes.
Conformal coating protection Yes
ENVIRONMENT
Temperature range -10°C to 50°C
Cooling Thermostatically controlled 2-speed fan.
STANDARDS AND APPROVALS
Safety standards AS3100, AS3000
C-tick AS/NZS CISPR14, AS/NZS 1044
EMC standards AS2279, EN55014
ALARMS AND INDICATORS
Inverter Operation

When inverter is switched on all 3 LEDS light up for one second for system check procedure

Power Indicator

Green LED. Flashes when in standby mode (no load connected). When load applied LED illuminates continuously

Undervolts/Overvolts

Red LED. In order to protect the battery the inverter will shutdown after 5 seconds if the battery voltage falls below its limit (Undervolts) LED remains continous or exceeds the maximum (Overvolts) LED will continue to flash.

Over temperature

Red LED, If the internal temperature exceeds safe operating limits for more than 5 secnds, the inverter will shut down in Over temp with this LED on continuously. Allow 5mins for the inverter to cool and reset the unit.

Over load

Red LED, if the load demands more current than the inverter can safely supply for more than 5 seconds, the inverter will shutdown in Overload and this LED will flash

OPTIONAL FEATURES
CODE ADD OPTION TO THE END OF INVERTER PART NUMBER
D RCD fitted in place of hardware junction box of AC output.
R Ruggedisation for high vibration environment.
K Automatic transfer switch 25Amp for 1000W to 1800W.
KX Automatic transfer switch with ON delay
timer and voltage sensing module. 40Amps
for 2000W to 4000W and 65Amp for
5000W to 7000W models.
V AC output voltage e.g. 100-120Vac.
H Frequency 60Hz
L "AC OK" alarm relay contact
C Twin switched GPO
(available only on 1000W to 5000W models).
D Twin switched RCD GPO
(available only on 1000W to 5000W models).
MECHANICAL
AC outlet Single power outlet (500-600W models). Single power outlet & screw terminal junction box (1000-1800W models). Screw terminal junction box (2000-7000W models).
Battery leads

Heavy duty low loss battery leads

Red battery positive, Black battery negative

Dimensions

500-600W: 260x160x100mm

1kw-1.8kw: 330x296x150mm

2kw-3.5kw: 370x386x180mm

4kw-7kw: 475x458x187mm

Weight : See Selection Table

Selection Table

MODEL NUMBERDC INPUT

INPUT

RANGE

CONTINOUS

RATING

½ HOUR

RATING

SURGE

5 SEC

WEIGHT
PBMPLS-12U 12Vdc 10.5-17V 500W 550W 1500W 5.5KG
PBMPLS-12W 12Vdc 10.5-17V 1000W 1150W 3000W 11KG
PBMPLS-12V 12Vdc 10.5-17V 1500W 1600W 4500W 14KG
PBMPLS-12I 12Vdc 10.5-17V 2000W 2200W 6000W 22KG
             
PBMPLS-24X 24Vdc 21-34V 600W 750W 2000W 5.5KG
PBMPLS-24V 24Vdc  21-34V  1200W  1600W  3600W  11KG 
PBMPLS-24I 24Vdc  21-34V  1800W  2200W   5400W 14KG 
PBMPLS-24IA 24Vdc  21-34V  2300W  2800W   7000W  22KG
PBMPLS-24Z 24Vdc  21-34V  3000W  3700W  9000W   24KG
PBMPLS-24ZA 24Vdc  21-34V  4000W  4500W  12000W   30KG
             
 PBMPLS-48X 48Vdc  42-68V   600W  750W  2000W  5.5KG
PBMPLS-48V  48Vdc  42-68V  1200W   1600W  3600W  11KG
PBMPLS-48I  48Vdc  42-68V   1800W  2200W  5400W 14KG 
PBMPLS-48IA 48Vdc  42-68V   2500W  3000W  7500W  22KG
PBMPLS-48Z 48Vdc  42-68V   3500W  4100W 10500W   24KG
PBMPLS-48ZC 48Vdc  42-68V  5000W   6000W 15000W  30KG 
PBMPLS-48ZH 48Vdc  42-68V  7000W  8500W   20000W  34KG
             
PBMPLS-96X 96Vdc 77-140V  600W   750W  2000W 5.5KG 
PBMPLS-96V 96Vdc  77-140V  1200W  1600W  3600W  11KG
PBMPLS-96I 96Vdc  77-140V  1800W 2200W   5400W  14KG
PBMPLS-96IA 96Vdc  77-140V  2500W  3000W  7500W 22KG 
PBMPLS-96Z 96Vdc  77-140V  3500W   4100W  10500W  24KG
             
 PBMPLS-120X 120Vdc 95-177V  600W 750W  2000W  5.5KG 
 PBMPLS-120V 120Vdc  95-177V  1200W  1600W   3600W  11KG
PBMPLS-120I 120Vdc  95-177V  1800W   2200W 5400W  14KG 
PBMPLS-120IA 120Vdc  95-177V   2500W  3000W 7500W  22KG 
PBMPLS-120Z 120Vdc  95-177V  3500W  4100W  10500W   24KG
Back to Top

Ask Your Question