EFOY - Pro800/2400 Duo EFOY - Pro800/2400 Duo

Features

45 - 110W
Fuel Cell Battery Charger
Direct Methanol Fuel Cell
Portable & Enclosable
Long Duration of Maintenance Free Operation
Quiet & Emission Free
Remote Monitoring

Specification Sheet Make a Sales Enquiry

EFOY - Pro800/2400 Duo

Product Overview

EFOY Pro 800 / Duo and Pro 2400 / Duo

Methanol Fuel Cell Charger

EFOY Pro Fuel cell generators are smart energy producers that can be used to continuously and fully automatically recharge batteries. To do this, the fuel cell is connected directly to the battery that supplies consumers and monitors its charge level. The fuel cell recharges the battery fully automatically and then switches to standby - without any need for maintenance or intervention on the behalf of the user. To ensure longer autonomy without user intervention, a model with two cartridge connectors has been developed for both power classes of the EFOY Pro fuel cell - namely the EFOY Pro 800 Duo and the EFOY Pro 2400 Duo. EFOY Pro 800 Duo and EFOY Pro 2400 Duo are perfectly suited for installation inside a vehicle or mobile surveillance.

EFOY

EFOY HYBRID

EFOY TELECOMMUNICATIONS

EFOY Operating Principal

EFOY Case Study

Specifications

TECHNICAL DATA
Nominal voltage	12Vdc, 24Vdc See selection table
Nominal power	EFOY PRO 800: 25W - 45W EFOY PRO 2400: 80W - 110W See selection table
Charging current	See selection table
Switching threshold for automatic	On: <12,3 V / <24,6 V
Battery charging at 12V / 24V	Off: >14,2 V / >28,4 V
Start-up voltage at 12V /24V	>9 V / >18,5 V
Maximum battery voltage	<16 V / <32 V
Noise level	42 dB(A) / 25 dB(A) (at 1m / 7m distance)
Nominal consumption 5	0,9 l/kWh
Quiescent current	20mA at 12V
Dimensions L x W x H	433 x 188 x 278 mm
Length fuel cartridge connector	70 cm

INTERFACE
User-Interface	At the unit or via Operating Panel OP2 with text display
Data-Interface	RJ-45 plug for accessories (e.g. Interface adapter)
Electrical Interface	MNL-plug 4-pins (e.g. Tyco Electronics Universal Mate-N-Lok ; Nr. 350779)

ENVIRONMENTAL
Operating temperature	-20 °C to +50 °C
Start-up temperature	+3 °C to +50 °C
Storing temperature	+1 °C to +50 °C
Recommended altitude	Standard: ≤1500 (up to 2000m)
International Protection	IP 21
Inclination along the roll axis	Permanent: max. 35° Temporary (<10 min): max. 45°
Inclination along the lateral axis	Permanent: max. 20°

STANDARD KIT EQUIPMENT
Operating panel OP2 with cable	- Display for view values and settings - Surface mount frame - Operating panel with black frame
Mounting plate for EFOY Pro	For secure mounting of the EFOY Pro
Charge line for battery connection	- Connecting line to fuel cell (1 m) - Cable with fuse 2A Sense - Cable with fuse 15A Power
Fuel Cartridge holder with belet	For safe transport of the M5 or M10 fuel cartridge in the vehicle these are fastened using a cartridge holder and a belt. For mounting the cartridge holder in the vehicle you will need four screws and, if necessary, appropriate anchors.
Exhaust hose	During operation the device will produce water vapour and carbon dioxide. These are led to the outside by means of the exhaust hose. The insulation prevents water from freezing. Length: 1.2M.
Off heat duct	During operation the EFOY Pro generates off heat. The off heat duct is used to conduct this off heat to the outside. - Off heat flange - Off heat blow - Off heat tube - External face plate - Lense head screws M4 and 10 (4 screws)

ACCESSORY KIT EQUIPMENT
DuoCartSwitch DCS1	Dimensions	174 x 119 x 96mm
	Weight	0.7 kg
	International Protection (IP-Class)	IP 20
	Quiescent current draw	7.5 mA
GSM modem GSM-2-SMS	Dimensions	72 x 32 x 65mm
	Weight	0.5 kg
	Input Voltage	8 – 30 V dc
	Max. peak current	3.2 A
	Average current draw (Quiescent / SMS / GPRS)	30 / 100 / 100 mA
Fuel cartridge sensor FS1	Dimensions	50 x 20 x 5mm
Interface adapter IA1	Dimensions	60 x 33 x 16mm
Cluster controller CC1	Dimensions	149 x 77 x 270mm
	Weight	0.16 kg
M28 adapter	Dimensions	70 x 70 x 61mm

Selection Table

FUEL CELLS	EFOY PRO 800	EFOY PRO 800 DUO	EFOY PRO 2400	EFOY PRO 2400 DUO
Max. nominal power	45W	45W	110W	110W
Min. nominal power	25W	25W	80W	80W
Nominal volt	12Vdc / 24Vdc	12Vdc / 24Vdc	12Vdc / 24Vdc	12Vdc / 24Vdc
Charging current at 12V/24V max.: min	3.75A / 1.88A 2.1A / 1.05A	3.75A / 1.88A 2.1A / 1.05A	9.17A / 4.58A 6.7A / 3.3A	9.17A / 4.58A 6.7 A/ 3.3A
Recommended battery capacity 2 x 12Vdc (Lead acid, gel, AGM) at 24Vdc	40 to 160AH 10 to 100AH	40 to 160AH 10 to 100AH	60 to 350AH 30 to 175AH	60 to 350AH 30 to 175AH
Weight	8,0kg	8.3kg	9.0kg	9.3kg
Connectable Cartridges	1(2)	2 (4)	1 (2)	2 (4)

Nominal power varies by ±10 %, decreases with the operation hours. Specification valid within warranty period.

FUEL CARTRIDGES	M10	M28
Volume	10L	28L
Weight	8.4kg	22kg
Nominal Capacity	11.1kwh	31.1kwh
Dimensions LxWxH	230 x 193 x 318mm	370 x 285 x 485 with M28 Adapater

Technical Illustration

EFOY - Pro800/2400 Duo EFOY - Pro800/2400 Duo