Product Quick Selection Wheel

SYNERGI Series SYNERGi - Smart Integrated Energy

Features
  • Smart fully integrated hybrid solution
  • AC Generator. Solar PV and Wind Inputs
  • 1kW to 36kW max power configurable
  • Outputs: 12Vdc. 24Vdc. 48Vdc. 120Vac. 220Vac
  • Lowers OPEX by up to 80% reduce CO2 emissions
  • Robust versatile and modular architecture
  • Highest efficiency power conversions reduce heat
  • and energy losses by over 50%
  • One smart controller for advanced energy
  • and peripheral management
  • Comprehensive control logic and data logging
  • Remote monitoring reporting & control via web and SNMP
Specification Sheet Make a Sales Enquiry

SYNERGi - Smart Integrated Energy

Product Overview

SYNERGi  Smart Integrated Energy 

Smart Integrated Energy   We believe SYNERGi is the world’s most advanced hybrid energy solution. SYNERGi intelligently and efficiently optimizes its use of each energy source, assisting designers create the most cost-effective system for each site. SYNERGi is unique for its dynamic detection of conditions and best-use of existing capital equipment, whilst also extending generator and battery service-lives. By dynamically self-optimizing and self-healing, Synergi systems deliver maximum system up-time, lowest capital costs, lowest running costs and lowest generator emissions. For example, due to their astounding efficiency (approximately 97%) and sensitivity, Synergi solar-converters ‘start’ earlier and ‘stop’ later each day, thus harvesting more solar energy than would otherwise be expected. Each SYNERGi controller is generic, facilitating easier deployment and commissioning of multiple systems at multiple sites. System optimization is extraordinarily simple; field results and related patents prove this. Commissioning costs are therefore lower because fewer site visits are required to ‘tune’ each system.

From off-Grid to ON-grid applications, SYNERGi, dynamically detects conditions to optimise the operation of existing capital, so extends lifetimes and reduces OPEX. It minimises the dependency on fossil fuels by maximising any generators output and efficiency. They SYNERGi solutions is universal, so the lengthy and expensive visits necessary in designing typical site specific systems are avoided. The integrated modular Solar Charger includes the MPPT algorithms with increased response times so allows the greater periods in solar harvesting - it starts sooner and stops later. With an industry leading efficiency in excess of 97%, it ensures greatest utilisation of PV panel output.

From off-Grid to ON-grid applications, SYNERGi, dynamically detects conditions to optimise the operation of existing capital, so extends lifetimes and reduces OPEX. It minimises the dependency on fossil fuels by maximising any generators output and efficiency. They SYNERGi solutions is universal, so the lengthy and expensive visits necessary in designing typical site specific systems are avoided. The integrated modular Solar Charger includes the MPPT algorithms with increased response times so allows the greater periods in solar harvesting - it starts sooner and stops later. With an industry leading efficiency in excess of 97%, it ensures greatest utilisation of PV panel output.

Extends generator and battery lifetimes:   SYNERGi is unique as it dynamically detects conditions to optimize the operation of existing capital, so extends generator and battery lifetimes with significantly reduced OPEX. It minimizes the dependency on fossil fuels by dynamically maximizing any generator output to improve efficiency. The SYNERGi solution is universal allowing it to be easily deployed and commissioned at multiple sites. It will adapt to optimize out variables so, the expensive dimensioning and on-going visits necessary in deploying and maintaining other typical hybrids are avoided.

Tracks equipment health:  SYNERGi tracks site equipment health so maintenance can be pre-empted. Intelligently and efficiently optimizes energy sources to ensure a minimalist infrastructure footprint to lower CAPEX. Patented SYNERGi control algorithms dynamically take care of site anomalies and changing conditions.

 

Specifications

SINERGI ENERGY MANAGER
*

The Synergi Energy Manager provides all the necessary control parameters for starting & stopping up to 2 generators, and also caters for partial grid connection.

*

The Synergi Controller provides dynamic adjustment of the DC system output power to match the optimum power output of the site generator. This is termed Dynamic Diesel Generator Optimisation (D2GO). The Synergi Controller provides:
*

• Automatic generator maximum power tracking & anti-stall

• Automatic setting of generator load to user-defined optimum level

• Ability to control two generators alternating their cycles to synchronise their servicing

• Inclusion of “Green” energy sources – Solar and Wind Converters

• Full kWhr logging of all energy sources (grid, gensets, solar, wind) on an hourly, daily and monthly basis

• Front-panel key-switch to prevent unexpected genset start-up during genset servicing

• One-step front-panel control to provide battery initialisation (commissioning) charge

*

• Start/Stop Generator based on:

• Time of day (up to 2 periods per day) (Time-based starts greater than 1 day can be programmed via the Extended Charge feature)

• Battery Voltage

• Battery Ahrs (Battery Capacity)

• All Start stop Functions can be enabled at once to ensure maximum security. Generator will start on whichever start condition is met first and stop according to the parameters set for that condition.

• Choice of Generator Stop function based on time, low battery current and/or battery capacity (Ahrs)

• Facility to allow for battery recharge inefficiency to enable recharge of battery to true full capacity

• Logging of battery charge/recharge, actual Ahrs charged into the battery and projected capacity creating accurate battery history

• Simple manual starting of the generator via the Synergi Controller front panel

• Generator Run Hours indicator for each genset

• One-step front panel control to provide a pre-set 1-hour genset run
INTEGRATED ENERGY SOLUTION SUMMARY
Input Sources

Solar DC

Wind DC

Fuel Cell DC

Utility AC

Generator AC
Output Voltages

DC Input: 12Vdc, 24Vdc 48Vdc

AC Input: 120Vac, 240Vac
Output Power

Configurable 1Kw to 36Kw
Solar Chargers

SM2048HE: 220Vdc - High Voltage Module

SM1848: 200Vdc - Low Voltage Module
SYNERGI - INTEGRATED ENERGY
DC Modular Rectifier

RM2048HE

Leading efficiency & reliability

Modular hot plug / swap
DC Solar Charger

SM2048HE

Improved MPPT algorithms maximises harvest

Galvanic isolation & earth fault detection
DC Wind Charger

WM2048HE

Customerisable power curve

Wide input range
Hybrid Controller

Single controller for complete energy management

Advanced generator control

Intelligent renewables optimisation

Selection Table

SYNERGI DIMENSIONING

In order to augment the economics of hybrid solutions, the goal is to maximize the battery time and minimize the charging time. SYNERGi is compatible with various battery storage mediums; yet it is those designed specifically for highly cyclic fast charging regimes which will provide the best battery life and diesel fuel savings. Battery life is dependent on the amount of energy discharged at each cycle. Maximizing the cycle life is possible at the expense of increasing battery capacity; targeted payback calculations and balancing desired CAPEX and OPEX benefits play a major role in determining the optimum battery size. Enatel Energy has developed an advanced dimensioning tool which is based on real world and actual data sets to simulate anticipated benefits; such as generator life, maintenance, fuel savings and payback. This allows users to understand the trade-offs, idiosyncrasies and evaluate against different battery types/configurations, solar integration and coordinate extended services etc

ADD SYNERGI TO AC GENERATOR SITES

Average Daily Site Power

1kW2KW3KW4KW
Genset Size (Standby Power((kW peak) 11 17.6 24 24
Battery Hours (Generic OPzV)(Ahrs) 600 1500 2000 2500
Battery Life (Years) 4.05 5.47 5.39 4.02
Genset Runtime Saving 80% 81% 81% 81%
Fuel Usage (L/Day) 13.32 17.83 21.89 34.28
Potential Fuel Saving 70% 72% 71% 55%
SYNERGI DIMENSIONING

Renewables are added simply and effectively with SYNERGi building blocks – the Solar and Wind Charger modules tightly couple with the rest of the DC power system ensuring optimum power delivery, cohesion between energy sources, and ease of integration. The below are the expected improvements by adding Enatel’s modular Solar chargers.

ADD SOLAR TO A SYNERGI DIESEL GENERATOR SITE

Solar Size (kW out of Solar Converter)

3kW4KW6KW8KW
Battery Life (Years) 8.62 7.07 6.44 6.06
Genset Runtime Saving 91% 86% 84% 81%
Fuel Usage (L/Day) 6.0 13.8 18.3 22.7
Potential Fuel Saving 86% 78% 76% 70%

Technical Illustration

  • SYNERGi's advanced dimensioning tool SYNERGi's advanced dimensioning tool
Back to Top

Products

Customer Service


Product Partners

POWERBOX PACIFIC

Follow Powerbox Pacific

on Linkedin

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au
© 2018 Powerbox. All rights reserved.
Close

Ask Your Question