Optional SmartSolar Control Display By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities
Advanced Maximum Power Point Detection in case of partial shading conditions: If partial shading occurs, two or more maximum powerpoints may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstandng conversion efficiency: Maximum efficiency exceeds 98%. Full output power up to 40C.
Flexible charge algorithm: Fully programmable charge algorithm. One user programmable algorithm. Manual or automatic equalization. Battery temperature sensor. Battery voltage sense option.
Extensive electronic protection: Over-temperature protection and power derating when termperature is high, PV short circuit and PV reverse polarity protection, PV reverse current protection.
Internal temperature sensor: Compensates absorption and float charge voltage
for temperature..
Bluetooth Smart built-in: dongle not needed : The wireless solution to set-up, monitor and update the controller
using Apple and Android smartphones, tablets or other devices.
VE.Direct : For a wired data connection to a Color Control panel, Venus GX, PC
or other devices
Remote on-off: To connect for example to a VE.BUS BMS
Programmable relay : Can be programmed (a.o. with a smartphone)
to trip on an alarm, or other events.
Optional: pluggable LCD display : Remove the seal that protects
the plug on the front of the controller, and plug-in the display..
