Product Quick Selection Wheel
  • Home /
  • SmartSolar MPPT 75/10, 75/15, 100/15 & 100/20

Solar charge controller SmartSolar MPPT 75/10, 75/15, 100/15 & 100/20

Features
  • 10A to 20A Solar Charge Controller
  • Maximum PV open circuit voltage 75V and 100V
  • Battery voltage 12V. 24 Vdc Autoselect
  • Bluetooth Smart built-in
  • VE.Direct
  • 98% efficiency
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Advanced Maximum Power Point Detection
  • Remote Monitoring and Control Intelligent Load output function
  • Extensive electronic protection
Specification Sheet Make a Sales Enquiry

SmartSolar MPPT 75/10, 75/15, 100/15 & 100/20

Product Overview

 

SmartSolar MPPT 75/10, 75/15, 100/15 & 100/20    

Solar charge controller   A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Models: 12/24 VoltVolt

Ultra-fast Maximum Power Point Tracking (MPPT):   By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intesity is constantly changing.. 

Remote Monitoring and Control  Remotely control and monitor the extensive features of your BlueSolar MPPT charger by attaching a bluetooth dongle and pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.. 

Load outputl  The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.. 

Bluetooth Smart built-in: dongle not needed : The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.

VE.Direct : For a wired data connection to a Color Control panel, Venus GX, PC or other devices

Optional SmartSolar Control Display  By adding the SmartSolar Control Display you will be able to check the status of your Charger and battery-storage at a glance. Simply plug it into the face of your MPPT charger to provide you with real-time monitoring and set-up capabilities 

Battery Life: intelligent battery management   When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week 

Advanced Maximum Power Point Detection in case of partial shading conditions:   If partial shading occurs, two or more maximum powerpoints may be present on the power-voltage curve.  Conventional MPPTs tend to lock to a local MPP, which may not be optimum MPP.  The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstandng conversion efficiency:   Maximum efficiency exceeds 98%.  Full output power up to 40C.

Specifications

SmartSolar Charge Controller
Battery Voltage

12V, 24V Auto Select
Rated charge current

See selection table
Nominal PV power

See selection table
Maximum PV open circuit voltage

MPPT75/10, 75/15, 75V

MPPT100/15, 100/20, 100V
Maximum efficiency

98%
Self-consumption

12V: 25mA, 24V: 15mA
Charge voltage 'absorption'

14,4V / 28,8V (adjustable)
Charge voltage 'float'

13,8V / 27,6V (adjustable)
Charge algorithm

multi-stage adaptive
Temperature compensation

-16 mV / °C resp. -32 mV / °C
Continuous load current

MPPT75/10 &75/15 , MPPT100/15, 15A

MPPT100/20, 20A

Low voltage load disconnect

11,1V / 22,2V or 11,8V / 23,6V or

Battery Life algorithm
Low voltage load reconnect

13,1V / 26,2V or 14V / 28V or

Battery Life algorithm
Protection

Battery reverse polarity (fuse)

Output short circuit

Over temperature
Data communication port

VE.Direct or Bluetooth
ENVIRONMENTAL
Operating temperature

-30 to +60°C (full rated output up to 40°C)
Humidity

95%, non-condensing
Maximum altitude

5000m (full rated output up to 2000m)
Environmental condition

Indoor, unconditioned
Pollution degree

PD3
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
MECHANICAL
Colour Blue (RAL 5012)
Power terminals

6 mm² / AWG10
Battery terminals 35 mm² / AWG2
Protection category IP43 (electronic components),

IP22 (connection area)
Weight

MPPT75/10, 75/15 , 0.5 kg

MPPT100/15, 0.6 kg

MPPT100/20, 0.65 kg
Dimensions (h x w x d)

MPPT75/10, 75/15 , 100 x 113 x 40 mm

MPPT100/15, 100 x 113 x 50 mm

MPPT100/20, 100 x 113 x 60 mm

Selection Table

SmartSolar Charge Controller        

MPPT 75/10

MPPT 75/15

MPPT 100/15

MPPT 100/20

Battery voltage (Auto Select)

 

12 / 24V

Rated charge current  10A 15A 15A 20A
Nominal PV power, 12V 1a,b)  145W 220W 220W 290W
Nominal PV power, 24V 1a,b)  290W 440W 440W 580W
Max. PV short circuit current 2) 

13A

 15A 15A

20A
Automatic load disconnect 

Yes, max load 15A

20A

1a) If more PV power is connected, the controller will limit input power.

1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V./p>

2) A higher sort circuit current may damage the controller in case of reverse polarity connection of the PV array.

Technical Illustration

Back to Top

Products

Customer Service


Product Partners

POWERBOX PACIFIC

Follow Powerbox Pacific

on Linkedin

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au
© 2018 Powerbox. All rights reserved.
Close

Ask Your Question