Product Quick Selection Wheel

DRP BN-1PH-48 SERIES DRP BN-1PH-48 - Delta AC/DC DIN Rail

Features
  • 48VDC 60W - 480W
  • 1Ph AC/DC Power Supply
  • DIN Rail Mountable
  • Power will not de-rate for the entire input voltage range
  • Power Boost of 150% for 3 seconds
  • Conformal coating on PCBAs
  • To protect against common dust and chemical pollutants
  • Operating Temp -25C to 80C
  • MTBF DRP60W & 120W > 800 000hrs
  • MTBF DRP240W & 480W > 500 000hrs
  • Overvoltage / Overcurrent / Over Temperature / Short Circuit Protections
Specification Sheet Make a Sales Enquiry

DRP BN-1PH-48 - Delta AC/DC DIN Rail

Product Overview

 

Delta CliQII 60W to 480W 1 PHASE POWER SUPPLIES

Delta Electronics DRP Series is part of the CliQ II series of DIN Rail Power Supplies from one of the world’s largest power supply manufacturers and solution providers - Delta.

This product provides an adjustable output capable of operating from input voltages at 85-264Vac, and a wide temperature range of -20°C to 80°C. With a compact, rugged aluminium case that meets shock and vibration requirements (in accordance to IEC60068-2-27 and IEC60068-2-6 respectively), and conformal-coated PCB assembly, this state of the art design is well suited to a broad variety of industrial applications worldwide.

Delta’s CliQ II DIN Rail power supplies are highly suited for various industry applications like general automation, Test& Measurement, Engineering and Packing equipments etc.

Specifications

OUTPUT
Output Model DRP048V060W1BN DRP048V120W1BN DRP048V240W1BN DRP048V480W1BN
Output Voltage 48Vdc 48Vdc 48Vdc 48Vdc
Output Voltage Range 48V - 56Vdc 48V - 56Vdc 48V - 56Vdc 48V - 56Vdc
Output Current 1.25A 2.5A 5A 10A
Output Power 60W 120W 240W 480W
MTBF >800,000hrs >800,000hrs >500,000hrs >500,000hrs
Hold-up Time >125ms @ 230Vac >115ms @ 230Vac >20ms @ 230Vac >20ms @ 230Vac
Line Regulation < 0.5% typ. at 100% load
Load Regulation < 1% typ. at 0-100% load
PARD (20MHz) <200mVpp
Indicator Green LED (DC OK)
INPUT
Output Model DRP048V060W1BN DRP048V120W1BN DRP048V240W1BN DRP048V480W1BN
Input Voltage 85–264Vac, 120-375Vdc
Input Frequency 47-63Hz
Input Current <0.8A @ 230Vac < 1.1A @ 230Vac < 1.3A @ 230Vac <3A @ 230Vac
Efficiency at 100% Load > 90% at 230Vac > 90% at 230Vac > 92% at 230Vac > 92% at 230Vac
Leakage Current < 1mA @ 240Vac < 1mA @ 240Vac < 1mA @ 240Vac < 3mA @ 240Vac
Power Factor Conform to EN61000-3-2 Conform to EN61000-3-2 >0.90 at 230Vac >0.95 at 230Vac
Max Inrush <35A at 230Vac <35A at 230Vac <35A at 230Vac <35A at 230Vac
ENVIRONMENTAL
Output Model DRP048V060W1BN DRP048V120W1BN DRP048V240W1BN DRP048V480W1BN
Operating Temperature -25°C to +80°C -25°C to +80°C -25°C to +80°C -25°C to +75°C
Power De-rating > 50°C (2.5%/°C) > 50°C (2.5%/°C) > 50°C (2.5%/°C)

> 50°C (2.5%/°C)

> 70°C (5%/°C)

Cooling System Convection
Storage Temperature -40°C to +85°C
Operating Humidity 5 to 95% RH (Non-Condensing)
Operating Altitude 0 to 2,500m
STANDARDS
Electronic Equipment EN50718 / IEC62103 in Power Installatioins
Electrical Safety SIQ to EN60950-1, UL/cUL recognized to UL60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC60950-1
Industrial Control UL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File No. 181564)
CE In conformance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
Materials & Parts RoHS Directive 2011/65/EU Compliant
PROTECTIONS
Overvoltage 32V, +/-10% SELV Ouput, Hiccup Mode, Non-Latching (Auto-Recovery)
Overload/Overcurrent > 150% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)
Over Temperature  < 80C Surrounding Air Temperature @ 100% load, Non-Latching (Auto Recovery)
Short Circuit Hiccup Mode, Non-Latching (Auto-Recovery) when the fault is removed)
Degree of Protection IP20
Protection against shock Class 1 with PE (Primary Earth) connection
Galvanic Isolation

Input to Output: 4.0KVAC

Input to Ground: 1.5KVAC

Output to Ground: 1.5KVAC
MECHANICAL
Output Model DRP048V060W1BN DRP048V120W1BN DRP048V240W1BN DRP048V480W1BN
Case Cover Aluminium Aluminium Aluminium Aluminium
Dimensions 121 x 32 x 119.3mm 121 x 32 x 123.1mm 121 x 85 x 124.1mm 121 x 144 x 118.6mm
Weight 0.37Kg 0.72kg 1.1kg 1.37kg
Input Terminal 3pin pluggable 300V/15A 3pin pluggable 300V/15A 3pin pluggable 300V/15A 3pin pluggable 300V/30A
Input Wire AWG 22-12 AWG 20-12 AWG 16-14 AWG 18-10
Output Terminal 2pin pluggable 300V/15A 4pin pluggable 300V/15A 4pin pluggable 300V/15A 4pin 300V/30A
Output Wire AWG 22-12 AWG 20-12 AWG 16-14 AWG 12-10
Mounting Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail TS35 DIN Rail
PBB1P OPTION
Input Connector

IEC AC Power Socket

(with 2 meter IEC power cable supplied)
Mounting L Bracket

Optional Mounting bracket available

See technical illustrations
Drip Hood Cover

Optional Drip hood cover

Mounted on top of PBB1P power supply to protect against condensation drips

Selection Table

MODEL NUMBER

Output

Voltage

Output

Current

Power Boost

(5 Secs)   

Output

Power

                           
DRP048V060W1BN

48Vdc

 1.25A 1.8A 60W  
DRP048V120W1BN 48Vdc 2.5A  3.75A 120W  
DRP048V240W1BN 48Vdc 5A 7.5A 240W  
DRP048V480W1BN 48Vdc 10A  15A 480W  

MODEL NUMBER

PBB1P OPTION

OUTPUT

VOLTAGE

OUTPUT

CURRENT

DELTA

POWER SUPPLY 

          
PBB1P-120W-IEC-48V 48V 2.5A DRP048V120W1BN    
PBB1P-240W-IEC-48V 48V 5A DRP048V240W1BN    
PBB1P-480W-IEC-48V 48V 10A DRP048V480W1BN    
           

Technical Illustration

  • PBB1P IEC INPUT - ASSEMBLY OPTION PBB1P IEC INPUT - ASSEMBLY OPTION
Back to Top

Products

Customer Service


Product Partners

POWERBOX PACIFIC

Follow Powerbox Pacific

on Linkedin

POWERBOX PACIFIC LTD

Auckland Office:
+64 9 4158 320
sales@powerbox.co.nz

POWERBOX AUSTRALIA PTY LTD

Sydney (Head office):
+61 2 9457 2200
sales@powerbox.com.au
© 2024 Powerbox. All rights reserved.
Close

Ask Your Question